Related Manuals for Adam Equipment CQT1752GR
Summary of Contents for Adam Equipment CQT1752GR
- Page 1 Adam Equipment Grain Scale Model: CQT1752GR Part No. 3086611514, Rev A1, April 2012 Softw are Ver 3.3 © Adam Equipment Company 2012...
- Page 2 © Adam Equipment Company 2012...
-
Page 3: Table Of Contents
STABILITY......................14 AUTO POWER OFF ..................14 SETTING THE BACKLIGHT................14 CALIBRATION ..................... 15 TROUBLE SHOOTING ..................16 ERROR MESSAGES ..................16 PARTS LIST ......................17 10.0 SPECIFICATIONS ....................18 11.0 WARRANTY INFORMATION ................19 © Adam Equipment Company 2012... -
Page 4: Introduction
Thank you for purchasing your new grain scale w hich is based upon the Core series of Balances. The CQT1752GR model has been specifically designed to assist in the grading of grain qualit y follow ing screenings in relation to an initial sample w eight of grain, and t o give an indication of yield in Kilograms per hectoliter (k.hl), and Pounds... -
Page 5: Overview - Display / Key Board
[Tare] key Tares the balance [Store] key Stores the initial sample and subsequent weights following screening [Recall/CE] key Recalls stored weighing results and (CE) clears previously stored results from the memory © Adam Equipment Company 2012... -
Page 6: Installing Batteries
Remove the battery compartment cover and insert six batteries (R6P/LR6 /AA size) into the battery compartment. Battery compartment screws Battery compartment cover Batteries are not included ZERO indicator Indicates when the scale is at zero. STABLE indicator Indicates when the reading is stable. © Adam Equipment Company 2012... -
Page 7: Locating And Protecting Your Scale
Do not place near open windows, air-conditioning vents or fans that may cause a draught and unstable readings. Keep the scale clean, and do not stack material on the scale when it is not in use. © Adam Equipment Company 2012... -
Page 8: Basic Operation
The display will show the weight and the unit of weight currently in use. The stable indicator will light up when the reading is stable. WEIGHING UNITS Three weighing units are available: grams (g), Kilograms per Hectoliter (k.hl), and Pounds per bushel (L.bu) based on the Winchester bushel. © Adam Equipment Company 2012... -
Page 9: Grain Determining
4) To store this weight as the initial sample value, press the [STORE] key, the display will show “Store smp” and then return to the last weighing mode, an indicator above Smp/stored will show to confirm the sample weight has been stored in the memory. 400.00 g 0.5lt © Adam Equipment Company 2012... - Page 10 5 times with each result able to be stored and % dockage, grams, yield and net weight values to be recalled. Each time a net weight is stored the display will show Store x (x being the number of the screening performed). © Adam Equipment Company 2012...
- Page 11 Positive dockage (showing the % of grain remaining after screening) and indicating the 1 recorded set of test results. 75.0 1st 0.5lt stored Yield in Kilograms per hectolitre of the remaining grain following the first screening 60.00k.hl 0.5lt stored © Adam Equipment Company 2012...
- Page 12 Once a sample weight has been stored the scale will not allow you to change the container size. © Adam Equipment Company 2012...
-
Page 13: User Settings
1) The display w ill show ‘‘ X k.hl’’ (X being the current setting) 2) Press [TARE] to set ON or OFF for k.hl 3) Press [STORE] to select L.bu 4) Press [TARE] to set ON or OFF for L.bu 5) Press [RECALL/CE] t o confirm settings © Adam Equipment Company 2012... -
Page 14: Container Size
4) Press [TARE] to set ON or OFF for % (positive) 5) Press [RECALL/CE] t o confirm settings Pow er OFF the scale and then ON aft er pressing [RECALL/CE] to return to normal w eighing w ith the required settings. © Adam Equipment Company 2012... -
Page 15: Parameters
1) The display w ill show ‘‘ X ZEO’’ (X being the current setting) 2) Press the [TARE] key to increment through the various settings 1-7 3) Press the [RECALL/CE] key to confirm the setting chosen © Adam Equipment Company 2012... -
Page 16: Stability
Sets the backlight to be OFF at all times. 3) Press the [RECALL/CE] key to confirm the setting Pow er OFF the scale and then ON aft er pressing [RECALL/CE] to return to normal w eighing w ith the required settings. © Adam Equipment Company 2012... -
Page 17: Calibration
8) If the weight is within 5% of the last calibration the display will show PASS, exit the calibration routine and return to normal weighing mode. If the calibration is not successful the display will show FAIL and exit the routine, if the calibration fails try again. © Adam Equipment Company 2012... -
Page 18: Trouble Shooting
No Power when Battery may be flat. AC Change the batteries. Or turning on. adapter may not be working. use the AC adapter © Adam Equipment Company 2012... -
Page 19: Parts List
POWER SUPPLY STANDARD MODEL 12Vac 150ma- OZ 7.00.4.0.0026 POWER SUPPLY STANDARD MODEL 12Vac 150ma- EURO 7.00.4.0.0027 POWER SUPPLY STANDARD MODEL 12Vac 150ma- SA 3.08.1.0.2043 CARRY CASE 3.08.2.3.2032 BATTERY COVER 3.08.3.0.0001 COMPLETE PACKING 3.08.4.0.2029 POWER JACK © Adam Equipment Company 2012... -
Page 20: Specifications
6 digit LCD, 18mm digits, with backlight Balance ABS Plastic Housing Pan Size 145mm ø (5.7” ø) Overall 173 x 255 x 86mm (6.8” x 10” x 3.3”) Dimensions (w x d x h) Net Weight 760g (1.7lb) © Adam Equipment Company 2012... -
Page 21: Warranty Information
11.0 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. - Page 22 Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by Adam Equipment could void the user's authority to operate the equipment. W EEE COM PLIA NCE...
- Page 23 © Adam Equipment Company 2012...
- Page 24 For a complete listing of all Adam products visit our website at www.adamequipment.com © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment.
Need help?
Do you have a question about the CQT1752GR and is the answer not in the manual?
Questions and answers