Key Descriptions - Adam Equipment CCT Series User Manual

4.0 KEY DESCRIPTIONS

Keys
[0-9]
[CE]
[Print M+]
[MR]
[SETUP]
[SMPL]
[U.Wt]
[Tare]
[0]
[PLU]
[UNITS]
[CHECK]
[.]
Adam Equipment 2018
©
Functions
Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
Used to clear the unit weight or an erroneous entry.
Add the current count to the accumulator. Up to 99 values or full capacity
of the weight display can be added. Also prints the displayed values when
Auto print is switched off.
To recall the accumulated memory.
Used for setting the time and for other setup operations
Used to input the number of items in a sample.
Used to enter the weight of a sample manually.
Tares the scale. Stores the current weight in memory as a tare value,
subtracts the tare value from the weight and shows the results. This is the
net weight. Entering a value using the keypad will store that as the tare
value.
Sets the zero point for all subsequent weighing to show zero.
Used to access any stored PLU weight values
Used for selecting the weighing unit
Used to set the Low and High limits for checkweighing
Places a decimal point on the unit weight value display
10