ProForm 831.159341 Owner's Manual page 5

4. Slide the Brace(29) ontothethreadedboltprotrud-
ing fromthe TowerFrame(10). Threada 3/8"
N/lock Nut (6) ontothe threaded bolt.Do notfight-
en the Nylock Nut yet.
Place your foot on the extension and
sl_gh_
raise
the front
ofthe
Tower Frame (10). Align the lower "
end of the Brace (29) with the indicated 3/8" x
2 1/2" Co,age Bolt (1). Lowerthe Tower Frame so
the Brace slidesonto the Carriage Bolt. Thread a
3/8" Nut (2) with a 3/8" Lack'washer(3) onto the
Carrloge Bolt. Do not tighten the Nut yet.
5. With the helpof a second person,llftthe Upright(9)
and lowerif ontothe two indicated 3/8" x 2 I/2"
Carriage Bolts(1) in the Rear Bose(8).Thread a
3/8" Nut (2) ancl 3/8" Lockwasher (3) onto each
Carriage Bolt.Do not lighten the Nutsyet.
Attach the FrontBose(7) to the Upright(9) with two
3/8" x 3/4" Bolts(31).
_J .tighten the 3/8" Nylock Nut (6) attached in assem-
bly step 4, and the seven 3/8" Nuts (2) a,ached in
assembly steps 3 through 5.
4
29\6
s il I.I
• 6. Attach the Foot PIo_ (102) to the Upright (9) with
two 3/8" x 3/4" Bolts (31) and 3/8" Nylock Nuts
(6).
With the help of a secondperson, lift the Front Bose
(7). Peel the backing off three Rubber Pads (48).
Presstwo onto the undersideof the Front Bose in the
indiealed locations, and one onto the underside of
the Upright (9). Lower the Front Bose.
Presstwo RubberPods(48) ontothe RearBose(8)
in the somemanner.
31___6 _ 48
4