Main Screen; Customizable Readouts; Figure 14 Main Screen Layout - Michell Instruments Optidew User Manual

Optidew User's Manual
3.1.1

Main Screen

No.
1

Customizable Readouts

2 Sensor Status Display
3 Trend Graph
4 Operational Status Display
5 DCC On/Off
6 Max Cool On/Off
7 Standby/Operate
8 Setup
Michell Instruments
1
1
1
2
5 6
Figure 14
Name
3
4
7
Main screen layout
Description
Display measured and calculated parameters. See
section 3.1.2 for additional information
Displays both thermo-electric cooler (TEC)
drive and optical signal condition. Also indicates
whether TEC is 1 or 2 stage. See section 3.1.6 for
additional information
Plots measured dew point over time. Time base
can be changed in display settings. Touch the
readout once to enter full screen mode.
See section 3.1.5 for a detailed description of this
area.
Initiates or cancels a DCC. See section 4.4.1 for an
explanation of the DCC function.
See section 3.2 for DCC setup parameters.
Initiates or cancels a Max Cool. See section 4.4.2
for an explanation of the Max Cool function.
Toggles between Measure and Standby modes.
When switching to Measure mode a DCC cycle will
be initiated.
Access the Setup menu. See section 3.1.3 for
information on the menu structure and options.
OPERATION
8
15