Michell Instruments Optidew User Manual page 34

OPERATION
Display
Resolution
Temperature Unit
Pressure Unit
Timebase
Stability
Display Hold
Language
Brightness
24
Display screen
Figure 19
Changes the number of decimal places for all displayed
parameters
Available input: 1 DP, 2 DP
Measurement unit for temperature values
Available input: °C, °F
Measurement unit for pressure values
Available input: kPa, psig, psia, barg, bara
X axis span for trend graph on main screen
Input format: hh:mm
Limits: 00:01 to 10:00
Determines a stable measurement following DCC, which is
conditional to release Data Hold. Entered value is ΔDP over 30s.
Available input: 0.2 to 20
When enabled, values on display are also held during Data Hold
Available input: Off, On
Sets User Interface language
Available input: English, Deutsch, Español, Français, Italiano,
Português, USA, Russian, Chinese, Japanese
Display backlight control
Available input: 0 to 100%
Optidew User's Manual
97551 Issue 1, February 2018