Running A Report; Cash-In-Drawer Declaration; Declaring Cash - Sam4s ER-260 Operator's And Programming Manual

Running a Report

Cash-In-Drawer Declaration

Cash-In-Drawer Declaration is an optional feature that forces you to count the drawer and declare the
drawer count before a report can be run. By forcing the operator to declare, without knowledge of
the expected drawer totals, you are assured that all cash will be deposited. System option #8 must
be set to a value of 1 to enforce cash declaration. See "System Option Programming" on page 50 to
program system options.

Declaring Cash

ER-260 Electronic Cash Register
1. Find the report you wish to run from the table on the previous page.
2. Turn the control lock to the X or the Z position.
3. Press the appropriate key for the report you wish to run.
1. Turn the control lock to the X position.
2. Enter the amount of the cash counted, press
the SUBTOTAL key:
9 8 7
3. The printer will print the declared amount,
the cash-in-drawer total from the cash
register and compute the difference
4. Proceed to run the report you wish to print.
Note: You must run a report after
declaring cash before registering any
new transactions.
SUB
9
TOTAL
THANK-YOU
CALL AGAIN
INPUT AMOUNT
CASH IN DRAWER
DIFFERENCE
15:57 03-01-2006
000041
Reports • • • • 87
£98.79
£92.29
£6.50
00