How To Set Time And Date - Simplex 4100 Operator's Manual

Page 20
5.3

HOW TO SET TIME AND DATE

The following is an example of how to use the function keys to set the time and date.
A. Press the <MENU> key. The following will be shown on the alphanumeric
display.
Press <NEXT> or <PREVIOUS> to scroll
Change Access Level
B. Press the <NEXT> key. The following is displayed:
Press <NEXT> or <PREVIOUS> to scroll
Set Time and Date
C. Press the <ENTER> key. The current time and date information is displayed
along with instructions:
Press <FUNC> to change time and date
0:09:23
D. Press the <FUNC> key. The cursor, current time and date along with function
key definitions are displayed:
F1=Left F2=Right F3=Inc F4= Dec
0:09:23
NOTE: The cursor is positioned under the hour. Function key F1 will move the
cursor left. Function key F2 will move the cursor right. Function key F3
will increase the data above the cursor . Function key F4 will decrease
the data above the cursor. Set the time 1 minute ahead of source time.
E. Use the required function key to position the cursor under the data to be
changed (hour, minutes, seconds, date of month, month, and year). Day of
week is set by the system. Time entered does not start until the <ENTER>
key is pressed.
F. Use Function key F3 or F4 to increase or decrease data, as required.
Document No.: 4100-M001
SIMPLEX 4100 FIRE INDICATOR PANEL
FRI 01 JAN 88
FRI 01 JAN 88
28 March 2006
OPERATOR MANUAL
Issue 1.2