Error Led - Renishaw RMP400 Quick Start Manual

LOW BATTERY/START LED
Off
Battery is okay
and no M-code
start/stop in
progress
Battery low
M-code start/
stop in progress
Battery low and
M-code start/
stop in progress
Overload error
PROBE STATUS LED
Probe triggered
Probe seated
Overload error
1-30
RMI-Q visual diagnostics
P1, P2, P3, P4 SYSTEM STATUS LEDs
Off
Draft 5 16/04/18
Probe number empty
Probe number full, in standby
Probe number full, operating
Probe number full, 0.5 s
compatibility error
Selection error
Acquisition/clearing pending, full
Acquisition pending, empty
Acquisition complete, probe full
Clearing complete, probe empty
Key to the symbols
Continuously on
Flashing
SIGNAL LED
Off No probes
operating
Good
communications
Poor
communications
Overload error

ERROR LED

Off No error
Error
Overload error