Figure 7: Direction of rotation of the drive shafts
1
Counterclockwise
2
Direction of rotation: clockwise
Figure 8: Dimensions of the drive shaft coupling
3.4.1
Connection of additional equipment
The drive shaft couplings of the meter head (type "D") can be used for connecting
additional me-chanical or electronic measuring instruments. In this case, the total
driving torque must not exceed the approved value. If no additional equipment is
used, the drive shaft couplings are sealed.
Warning
When selecting cables, it must be ensured that the permitted threshold
values according to the EC type examination certificate of the relevant
equipment are not exceeded.
Manual TRZ 03· EN08 ·2018 September, 10th
3 Types of totalizers
3 Clockwise
4 Type „D" meter head
39