Types Of Totalizers; Type „F" Meter Head - RMG TRZ 03 Operating Instructions Manual

3 Types of totalizers

3. Types of totalizers
The RMG turbine meter TRZ 03 can be fitted with different totalizers.
33
3.1 Type „F" meter head
The current standard design is type "F" meter head without mechanical drive shaft
couplings. You can see this design in Figure 3: Type "F" meter head. Optionally,
an ENCO 08 encoder can also be integrated in the meter head (see Figure 1: Sec-
tional drawing of a turbine meter). In addition to the direct recording and display of the
operating volume flow, this design allows digital transmission to a flow computer
for calculating the standard volume flow rate. The necessary pressure and temper-
ature values can also be recorded, as shown in Figure 1: Sectional drawing of a
turbine meter.
1 Locking Screw 2 ENCO 08
Figure 3: Type "F" meter head
Manual TRZ 03· EN08 ·2018 September, 10th