Flowserve D30 Installation, Operation & Maintenance Manual page 8

Mounting
Note: If the positioner is installed in a
hazardous environment, it must be of a type
approved for this purpose.
All versions of the D30 positioner have an ISO
F05 footprint. The holes are used to attach the
D30 to the mounting bracket B. Please contact
PMV or your local distributor representative
with actuator specifics for the proper mounting
bracket and hardware.
The spindle shaft S09 can be changed to suit
various actuators in question by the use of
adaptors.
It is important that the positioner's spindle
shaft and the lever arms, that transfer the
actuator movements, are correctly mounted.
Any tension between these parts can cause
incorrect operation and abnormal wear.
Spindle shafts
Assembly examples
Rotary movement
D30 Digital Positioner
S39
0,091
2,30
M8x1
S39
Note: There are many spindle options available de-
pending on the actuator. Please contact your local PMV
supplier for all options available.
A
C
B
Linear movement
8
FCD PMENIM0030-01-A5 – 05/18
S09
0,394
10
M3 8
S9
S23
0,354
9
0,189
4,80
S23