Flowserve D30 Installation, Operation & Maintenance Manual page 24

The menu contents are shown in the figures on the right and the texts are described below:
Current values can be read using the Read Menu and some values can be reset.
Pos Shows current position
Set&pos Set point and position
Set&dev Set point and deviation
Pos graph
Shows position graph
Temp Shows current temperature
Statistics
n cycles Shows number of cycles.
1 cycle = [move of valve
+change direction+move
opposite direction] regardless
of size of each move/stroke.
Acc travel
Travel = [accumulated % valve
has moved/100].
Example: move 60% up + move
40% down =>Acc travel = 1
mean dev Shows accumulated
deviation in %
m.abs dev Shows accumulated
absolute deviation in %
# of resets
Shows number of resets
runtime Shows accumulated runtime
since last reset
Extr temp
Shows extreme min and max
temperature
Histogram Shows position and time for
position value
Alarms Displays tripped alarms
D30 Digital Positioner
BASIC MENU
READ
READ
pos
READ
set&pos
READ
S&P Actual
READ
set&dev
READ
Pos Graph
READ
temp
READ
Statistics
READ
Alarms
24
FCD PMENIM0030-01-A5 – 05/18
Statistics
n cycles
Statistics
pulse rate
Statistics
acc travel
Statistics
mean dev
Statistics
m. abs dev
Statistics
runtime
Statistics
# of resets
Statistics
extr. temp
Statistics
histogram
Statistics
Reset stat