Flowserve D30 Installation, Operation & Maintenance Manual page 27

The menu contents are shown in the chart on the next page and the various texts are described
below:
Actuator
Rotating
Linear
Lever
Lever stroke
Level cal
Direction
Direct
Reverse
Character
Linear
Equal %
Quick open
Sqr root
Custom
Cust chr
# of point
Cust curve
Curr range (Use this function to split range)
0%=4.0 mA
100%=20.0 mA Possibility of selecting which input signal values will correspond to
0% and 100% movement respectively. Examples of settings:
4 mA = 0%, 12 mA = 100%, 12 mA = 0%, 20 mA = 100%.
FULL MENU
SETUP
The Setup Menu is used for various settings.
Type of actuator
Rotating actuator.
Linear actuator.
Only for linear actuator.
Stroke length to achieve correct display. Input only needed in case display
value is off
Calibration of positions to achieve correct display.
Direct function (signal increase opens). Indicator/spindle rotates counter-
clock wise.
Reverse function.
Curves that show position as a function of input signal.
See diagram.
Create own curve.
Specify number of points
(3, 5, 9, 17, or 33)
Enter values on X and Y axes.
D30 Digital Positioner
Size of actuator
Small
Medium
Large
Extra large
y
27
FCD PMENIM0030-01-A5 – 05/18
Time out
10 s
25 s
60 s
180 s
Qo
Sqr
Lin
Eq%
Signal
x