3. Prepare the drive.
4. Install the drive.
5. Determine the status of the drive from the drive LED definitions.
6. If removed, install the front bezel.
The installation is complete.
For OS-specific RAID information to configure arrays, see RAID configuration on page 39.
RAID configuration
The HPE Apollo 70 System supports software RAID only. For OS-specific RAID information, see the following
resources:
•
SUSE Linux Enterprise Server ─ https://www.suse.com/documentation/sles-12/singlehtml/
stor_admin/stor_admin.html#part.software_raid
•
Red Hat Enterprise Linux Server ─ https://access.redhat.com/documentation/en-us/
red_hat_enterprise_linux/7/html/storage_administration_guide/ch-raid
Hardware options installation
39