If you do not have any of the suggested equipment for proper grounding, have an authorized reseller
install the part.
For more information on static electricity or assistance with product installation, contact an authorized reseller.
Remove the shipping bracket
A system shipped in a rack is secured by a shipping bracket. To allow the system to be extended out of the
rack during normal system operation, remove this shipping bracket.
Prerequisites
Before you perform this procedure, make sure that you have a T-25 Torx screwdriver available.
Procedure
1. Remove the screws securing the shipping bracket.
2. Remove the shipping bracket from the chassis.
Retain the shipping bracket and screws in case there is a need to ship or transport the rack-installed
system at a later date.
22
Setup