Remove The Rcm Module; Remove The Power Supply - HPE Apollo z70 User Manual

Procedure
1. Press the latch to open the release lever.
2. Pull the release lever to disengage the drive from the backplane, and then slide the drive out of the bay.

Remove the RCM module

Procedure
1. Press the RCM module release tab.
2. Release the strain relief strap from the RCM module latch.
3. Pull the RCM module away from the power supply handle.

Remove the power supply

Procedure
1. Press and hold the release lever.
2. Slide the power supply out of the bay.
26 Operations