Removing The Top Panel - Whirlpool WFC8090GX Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
To Remove the Top Panel
1. Unplug washer or disconnect power.
2. Turn off water supply to washer.
3. Disconnect cold inlet water hose and remove the drain
hose from the standpipe or laundry tub.
4. Lift up the bulk detergent lid and remove the bulk
dispenser container (see Figures 1 & 2).
Figure 1

Removing the Top Panel

Figure 2
5. Next, remove the six screw covers surrounding the
dispenser bezel and then remove the (6) Phillips screws
(see Figure 3). Remove dispenser bezel.
6. Remove two (2) Phillips screws from the rear of the top
panel as indicated in Figure 4.
Remove 2 Screws
7. From the rear of the washer/dryer, pull back on top cover,
lift up and remove.
Whirlpool Smart All-In-One Washer & Dryer
COMPONENT ACCESS
Dispenser Bezel
Figure 3
Figure 4
4-3
n