Whirlpool WFC8090GX Service Manual page 30

DIAGNOSTICS & TROUBLESHOOTING
TROUBLESHOOTING GUIDE (continued)
Problem
Dryer Cycle Will Not Check installation.
Heat
Check for L1 and L2.
Heater system malfunction.
Thermistor problem.
ACU problem.
TCO problem.
Shuts Off Before Drain pump filter is clogged.
Clothes Are Dry in
Auto Dry Setting
Dryness setting for auto dry cycles.
Thermistor problem.
n
2-12 Whirlpool Smart All-In-One Washer & Dryer
For Service Technician Use Only
Possible Cause Checks & Tests
Verify proper washer/dryer installation.
See TEST #11: Supply Connections, pg. 3-17.
See TEST #12a: Dry Heating Element, pg. 3-19.
See TEST #12b: Dry Temperature Sensor, pg. 3-20.
See TEST #1: ACU Power Check, pg. 3-4.
See TEST #12a: Dry Heating Element, pg. 3-19.
Clean filter if necessary. Refer customer to Use and Care Guide/
Installation Instructions.
Increase dryness level setting.
See TEST #12b: Dry Temperature Sensor, pg. 3-20.
Notes