Displaying And Maintaining Wmm; Wmm Configuration Examples - H3C MSR Series Configuration Manual

Table 4 The default EDCA parameters for APs
AC queue
AC-BK queue
AC-BE queue
AC-VI queue
AC-VO queue

Displaying and maintaining WMM

Task
Display WLAN statistics of the
specified client.
Display WMM configuration
information of the specified radio
or client.
Clear WMM statistics of the
specified radio or client.

WMM configuration examples

WMM basic configuration example
1. Network requirements
As shown in
the traffic.
Figure 29 Network diagram
2. Configuration procedure
# Configure interface WLAN-BSS 1 to use the 802.11e priority of the received packets for
priority mapping.
<Sysname> system-view
[Sysname] interface wlan-bss 1
[Sysname-WLAN-BSS1] qos trust dot11e
AIFSN
7
3
1
1
Command
display wlan statistics client
{ all | mac-address
mac-address } [ | { begin |
exclude | include }
regular-expression ]
display wlan wmm { radio
[ interface wlan-radio
wlan-radio-number ] | client { all |
interface wlan-radio
wlan-radio-number |
mac-address mac-address } } [ |
{ begin | exclude | include }
regular-expression ]
reset wlan wmm { radio
[ interface wlan-radio
wlan-radio-number ] | client { all |
interface wlan-radio
wlan-radio-number |
mac-address mac-address } }
Figure 29, enable WMM on the fat AP, so that the fat AP and client can prioritize
ECWmin ECWmax
4 10
4 6
3 4
2 3
66
TXOP Limit
0
0
94
47
Remarks
Available in any view.
Available in any view.
Available in any view.