802.11N Configuration Example - H3C MSR Series Configuration Manual

[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Configure a clear type WLAN service template, with no authentication.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid abc
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1] quit
# Bind WLAN-Radio 2/0 to service template 1 and WLAN-BSS 1.
[AP] interface WLAN-Radio 2/0
[AP-WLAN-Radio2/0] radio-type dot11g
[AP-WLAN-Radio2/0] channel 1
[AP-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
2. Verify the configuration:
The clients can associate with the APs and access the WLAN.
You can use the display wlan client command to view the online clients.

802.11n configuration example

The following matrix shows the feature and router compatibility:
Featur
e
802.11n
Network requirements
As shown in
applications. The AP provides a plain-text wireless service with SSID service. 802.11gn is adopted
to inter-work with the existing 802.11g network and protect the current investment.
Figure 8 Network diagram
Configuration procedure
1. Configure the fat AP:
# Create a WLAN BSS interface.
<AP> system-view
MSR80 MSR MSR90
0 900 0-E
Available
for Availabl
MSR800 e for
No
-W and MSR90
MSR800 0-E-W.
-10-W.
Figure 8, deploy an 802.11n network to provide high bandwidth access for multi-media
MSR MSR
930 20-1X
Available
Available
for MSR
for routers
930-W,
with a
MSR
SIC_WLA
930-W-G
N module
U, and
that
MSR
supports
930-W-G
802.11n
T.
21
MSR 20 MSR 30
Available Available
for for
routers routers
with a with a
SIC_WLA SIC_WLA
N module N module
that that
supports supports
802.11n 802.11n
MSR 50
Available
for
routers
with a
SIC_WL
AN
module
that
supports
802.11n