Displaying And Maintaining Wlan Rrm - H3C MSR Series Configuration Manual

Step
4. Set the scan type.
5. Set the scan report interval.
6. Configure only non-dot11h
channels to be scanned.

Displaying and maintaining WLAN RRM

Task
Display WLAN RRM information.
Command
scan type { active | passive }
scan report-interval seconds
autochannel-set avoid-dot11h
Command
display wlan rrm [ | { begin |
exclude | include }
regular-expression ]
32
Remarks
By default, the scan mode is auto.
Optional.
By default, the scan type is
passive.
Optional.
By default, the scan report interval
is 10 seconds.
Optional.
By default, the default setting of
the command depends on the
scan channel command.
Remarks
Available in any view.