Displaying And Maintaining Blacklist And Whitelist; Wlan Ids Configuration Examples; Wlan Ids Configuration Example - H3C MSR Series Configuration Manual

Displaying and maintaining blacklist and whitelist

Task
Display blacklist entries.
Display white list entries.
Clear dynamic blacklist entries.

WLAN IDS configuration examples

WLAN IDS configuration example

Network requirements
As shown in
address 000f-e215-1530) and Client 3 (MAC address 000f-e213-1235) to access the fat AP.
Configure the operating mode of the fat AP as hybrid to enable it to provide WLAN access services
and detect rogue clients in the network.
Figure 26 Network diagram
Configuration procedure
# Create a WLAN ESS interface.
<AP> system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Create service template 1 of clear type, configure its SSID as service.
[AP] wlan service-template 1 clear
Command
display wlan
blacklist { static | dynamic } [ |
{ begin | exclude | include }
regular-expression ]
display wlan whitelist [ | { begin |
exclude | include }
regular-expression ]
reset wlan dynamic-blacklist
{ mac-address mac-address | all }
Figure 26, WLAN IDS allows Client 1 (MAC address 000f-e215-1515), Client 2 (MAC
60
Remarks
Available in any view.
Available in any view.
Available in user view.