Step
30. Configure firewall.
31. Configure NAT.
32. Configure Portal.
33. Configure IPsec.
34. Configure the backup center.
35. Configure NetStream.
36. Configure NTP.
37. Configure IPX.
38. Configure port security.
Displaying and maintaining a WLAN interface
Task
Display information about WLAN
radio interfaces.
Display information about WLAN
BSS interfaces.
Command
•
firewall ethernet-frame-filter
•
firewall packet-filter
•
firewall packet-filter ipv6
•
firewall aspf
•
nat outbound
•
nat outbound static
•
nat server
•
portal auth-network
•
portal server
ipsec policy
•
standby interface
•
standby threshold
•
standby timer delay
•
standby timer flow-check
•
standby bandwidth
ip netstream
•
ntp-service broadcast-client
•
ntp-service broadcast-server
•
ntp-service multicast-client
•
ntp-service multicast-server
•
ntp-service in-interface disable
ipx encapsulation
•
port-security authorization ignore
•
port-security max-mac-count
•
port-security port-mode { mac-and-psk |
mac-authentication | mac-else-userlogin-secure
| mac-else-userlogin-secure-ext | psk |
userlogin-secure | userlogin-secure-ext |
userlogin-secure-ext-or-psk |
userlogin-secure-or-mac |
userlogin-secure-or-mac-ext }
•
port-security preshared-key { pass-phrase |
raw-key }
•
port-security tx-key-type 11key
Command
display interface [ wlan-radio ]
[ brief [ down ] ] [ | { begin |
exclude | include }
regular-expression ]
display interface wlan-radio
interface-number [ brief ] [ | { begin
| exclude | include }
regular-expression ]
display interface [ wlan-bss]
[ brief [ down ] ] [ | { begin |
7
Remarks
Available in any view.
Available in any view.