Connecting The Console Terminal; Console Access To The Ap - Aruba AP60 Installation Manuals

Aruba AP60/61: Installation Guide

Connecting the Console Terminal

Manual provisioning requires this procedure. You must use the serial console
breakout adapter cable to be able to access the serial console interface to the
AP60/61 while allowing the device to be powered by the AC adapter or POE
(from an Aruba Mobility Controller).
—The LAN connections are optional unless POE is used to power the AP.
N
OTE

Console Access to the AP

1
1 Connect the adapter's "To AP" RJ-45 connector to the Aruba
AP60/61 FE Port.
2 Connect the adapter's DB-9 connector to the serial port on
the console terminal.
16 Part 0500034-05
F 2-3 Aruba AP60/61 Console Topologies
IGURE
"To AP" Connector
to AP FE Port
F 2-4 Connecting Directly to the AP
IGURE
DB-9 Connector
2
to Console Terminal
"To Network" Connector
to FE Coupler
3
to LAN FE Cable To LAN
May 2005