F
IGURE
5
Specify the Aruba 60/61-specific parameters.
Configure the gain value appropriate for the location in which this AP will be
deployed. (See
Table 3-1
—If the AP being provisioned is a model with detachable antenna capability (such as an Aruba
N
OTE
AP-60) enter the antenna gain in dBi, for example 4.0. This is mandatory for all detachable
antenna models as the AP will not will bring up its radio interface or function as an AP without
it.
Complete specifying Master Discovery and IP Settings and click
2-2 Port Range Screen
for appropriate antenna gain values.)
Chapter 2
Apply
.
Provisioning Access Points
13