Aruba AP60 Installation Manuals page 18

Aruba AP60/61: Installation Guide
2 Configure the APs Subnet and Netmask.
This is the subnet from which the AP gets an IP during provisioning. (This is not
the IP address the AP will use when deployed. The provisioning subnet should
be not be the same as an existing subnet on Mobility Controller.)
3 Select the Port or Port range for provisioning.
To set the Port Range, select the first and the last ports of your range. All the
ports in between are automatically selected. (Ports have to be sequentially
assigned.)
4 Enter the required information and click
displays.
12 Part 0500034-05
F 2-1 Provisioning Tab
IGURE
Enable
.The Port Range screen
May 2005