Connecting The Ethernet Cable - Aruba 560EX Series Installation Manual

Mechanical drawing:

M4x6 screw

Material: SUS316

Salt spray test: 200H

Mechanical drawing:


Connecting the Ethernet Cable

To connect the Ethernet cable to the access point, perform the following steps.
!
Failure to use the included Ethernet cable glands can lead to connectivity and POE issues.
The cable is not included and must be purchased separately. Purchase a suitable UV-resistant, outdoor rated,
CAT 5E or better RJ45 cable for use with the access point.
8
Aruba 560EX Series Hazardous Location Access Points | Installation Guide