Aruba 60 Detachable Antennas - Aruba AP60 Installation Manuals

Aruba AP60/61: Installation Guide
The Aruba AP60/61 can be mounted on a wall or suspended from above (not
shown) using one of the optional mounting kits (dimensions vary) in the
following ways:
1
N —For dimensions, see
OTE
tional space on the right-hand side for cables. Measurements for the
Aruba 60 depend on attached antennas, which vary.

Aruba 60 Detachable Antennas

Before deploying the Aruba 60, attach the appropriate antennas (not included).
The antenna connections should be tightened by hand to avoid overtightening.
The Aruba 60 has dual Reverse Polarity SMA (RP-SMA) female antenna
connectors that accept a variety of high-gain detachable antennas. See
Table 3-1 for the list of FCC approved antennas tested for use with the Aruba
60.
Make sure that all external antennas and their associated wiring are located
entirely indoors. The Aruba 60 Access Points and their optional external
antennas are not suitable for outside use.
24 Part 0500034-05
F 3-1 Aruba AP60/61 Mounting Options
IGURE
"Product
2
Specifications". Allow 5 cm (2") addi-
3
May 2005