Table of Contents
Advertisement
Figure 47: Mirage 18 front
and side panels.
Removal
The Mirage 18 cladding consists of four panels; the right and left (as seen from the viewers' perspective), and
an upper and lower panel inset with grills. To remove the panels for service reasons or to change to a different
set of panels, begin by removing the mesh screen panel (Figure 48) so as not to accidentally damage the
mesh screen. The mesh screen panel easily lifts off of four posts - two on either side of the glass door.
Remove the side panels rst by removing the 3 screws that secure the side panels to the heater (Figure 49).
Then push the panels toward the front of the stove. This will free the panels from the front positioning posts/
screws (Figure 52 and Figure 53).
060718-44
Exterior Panel Removal/Installation
Figure 48: Removing mesh
Figure 50: Mirage 18 side panels.
screen cover.
Figure 49: Side panel attachment
33
points.
100000432-50
Hide quick links:
Advertisement
Table of Contents
