Table of Contents
Advertisement
Gas Type
Natural Gas
Propane
Note: To test the gas pressure, turn off the gas supply to the stove before loosening test point
screws. Verify gas pressures with the stove lit and at the highest setting.
1. Remove switch cover and back panel and locate the valve as seen in Figure 43.
2. Locate the inlet and outlet test points on the valve which can be seen in Figure 44. After locating
test ports loosen the screws within the ports using a at-tipped screwdriver.
3. Attach pressure gauge to the test ports.
4. Turn gas supply back on and test pressures.
5. After testing is nished turn off gas supply, remove the pressure gauges and re-tighten the
screws in the test points.
060718-44
Gas Pressure Check
Injector (mm)
MIN / MAX
1.98
13.19 / 18.99
1.25
14.77 / 18.99
Gas Pressure Testing Procedure
Manifold
(MJ/hr)
Pressure (kPa)
0,87
2.48
23
Inlet Pressure
(kPa)
1.13
2.75
100000432-50
Hide quick links:
Advertisement
Table of Contents
