Door Removal / Installation - Pacific energy MIRAGE 18 Installation And Operating Instructions Manual

Securing nuts
Figure 37: Secring the glass door.
Figure 38: Screen panel installation.
100000432-50

Door Removal / Installation

12
Removal
1. Lift the mesh screen cover up and
pull away from unit (Figure 38).
2. Remove the 12 3/8" (9.525 mm)
nuts (Figure 37) Carefully remove the
glass retainer with the glass by tilting
the top towards you.
Installation
1. Position the glass retainer's frame so
that the studs on unit align with holes
in frame. Secure using 12 3/8" (9.525
mm) nuts.
CAUTION: Over tightening of nuts
could result in glass fracturing.
2. Insert and lower the screen mesh
cover by positioning the door's pins
into the slots in the rebox frame.
28
060718-44