Glass Front Removal - Pacific energy The Oxford Installation And Operating Instructions Manual

GLASS FRONT REMOVAL

Fig. # 12
The front overlay and glass frame are designed for easy removal.
Remove as follows:
Front Overlay Removal:
1) Shut off gas and let the appliance cool if it has been operating.
2) Grasp the overlay with one hand at the base of the arch and the
other at the ash lip.
3) Lift up and then forward to disengage. Lifting up approximately 1/
4" which will free the overlay from its mounts (see Fig.#12).
4) Place the front overlay in a safe place to avoid damage. Handle
enamelled parts carefully to avoid chipping.
Window Frame Removal:
1) Remove two wing nuts located at the base of the window frame.
2) Grasp the sides of the frame and swing the bottom out to clear. Lift
up and then forward to disengage from the top. Place face up on a flat,
stable surface to avoid damage.
Installation is the reverse of removal. During installation, ensure that
the slots in the glass frame engage with the corresponding tabs on the
Front Overlay
top of the unit (see Fig. #14 below).
Attachment
Points
Fig. # 14 Frame Tabs
f i r e - p a r t s . c o m
Fig. # 13
Front Overlay
Attachment
Slot and Pin
Primary Air Adjustment Rod
Window Frame
Wing Nut
16