Adjusting The Shock Position; Moving The Patient Chair (Mobile/Complete Versions) - Atmos Chair Professional Operating Instructions Manual

4.4 Adjusting the shock position

4.5 Moving the Patient Chair (Mobile/Complete versions)

ATTENTION
Damage caused by moving the patient chair in contravention of intended use.
There is a risk of damage to the patient chair and the power cable.
• Do not transport any weights or persons on the patient chair.
• Do not roll the patient chair over the power cable.
14 Operation
1. Adjust the angle of the backrest up to a fully
horizontal position.
1. Move the chair to its bottom position.
2. Move the backrest to an upright position.
3. Pull the power plug out of the socket and place
the power cable on the patient chair.
1
4. Place the foot switch on the patient chair.
5. Press the foot pedal
rollers.
6. Move the patient chair to the required position.
7. Press the foot pedal
down to extend the
1
up to retract the rollers.
1