Technician Menu - KERN KXE-TM Operating And Installation Instructions

14 Technician menu

•
In verified weighing systems the access to the technician menu is
locked.
In order to unlock the access, the seal must be destroyed and the
adjustment switch be actuated (see chap. 6.8).
•
Attention:
After destruction of the seal the weighing system must be re-verified by
an authorised agency and a new verification wire/seal mark fitted before
it can be reused for applications subject to verification.
Call up menu:
Actuate adjustment switch, „SET" followed by „01 CSP" is displayed.
Use and
To exit the menu / back to weighing mode, actuate adjustment switch.
KXE-TM-BA_IA-e-1110
to switch over between the following menu items:
• Configure
• Adjustment
• Enter password
• Change settings of the unit
35