KERN KXE-TM Operating And Installation Instructions page 40

Ensure that there are no objects on the weighing plate.
Wait for stability, then press
Cancel the adjustment with
Having adjusted the zero point, „SPAn" will be displayed, followed by the
currently set weight value for the adjustment weight.
Either use the displayed adjustment weight or change it with
(numerical input see chapter 2.1.1), the active digit is flashing.
Place the indicated adjustment weight and wait for stability.
Acknowledge with
• Cancel the adjustment with
• Back to weighing mode, actuate adjustment switch.
40
.
After approx. 5 seconds the zero point adjustment is completed.
, the appliance returns into the menu.
.
After approx. 5 seconds the adjustment is completed.
, the appliance returns into the menu.
, and
KXE-TM-BA_IA-e-1110