Peak Value Function - KERN KXE-TM Operating And Installation Instructions

10.3 Peak value function

This function displays the highest load value (peak value) of a weighing.
The peak value remains in the display until it will be deleted.
Mode 1: Menu setting FNC-07 „1"
From a weighing value of >10 d the highest load value will be displayed.
The peak value remains in the display until it will be deleted using . Then the
balance is ready for further measurements.
Display
Mode 2: Menu setting FNC-07 „2"
From a weighing value of >10 d the highest load value will be displayed. If the weight
value is less than 10d, the displayed peak value will be automatically deleted.
Display
KXE-TM-BA_IA-e-1110 29