Wrap-Around; Timeout; Menu Structure - Edwards EPX HiVac Series Instruction Manual

4.5

Wrap-around

When you use the up and down buttons to change a digit or character on the display, the digit or character will 'wrap-
around' between its minimum and maximum values. For example, when you enter a password digit, if the digit is '0'
and you press the down button, the digit will change to '9'; if the digit is '9' and you press the up button, the digit will
change to '0'.
4.6

Timeout

After you have entered a menu (other than the Normal menu), if you do not press a button for five minutes, the EUC
or PDT will automatically exit the current menu and enter the Normal menu. This facility (known as timeout) is
available so that if the setup menu is entered and then EPX system is accidentally left unattended, the menu is exited
to prevent unauthorized use of the menu options.
4.7

Menu structure

The display and the control buttons are shown in
The menu structure is shown in
corresponding menu option is shown as 'NP' (not present).
Menu
PDT menu logic
Switch on
Switch off
Normal (default) Menu
Status Menu
Control Menu
Setup Menu
Software Version
Select Units Menu
Select Line Menu
Service Menu
Serial Number
Time/Date
© Edwards Limited 2007. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Figure 7.
Table 15. Note that if a particular system component or accessory is not fitted, the
Table 15 - EUC and PDT menu structure
A419-00-880 Issue F
Figure
19
20
21
22
23
24
25
26
27
28
Service Personnel only
Service Personnel only
Service Personnel only
Page 39