Na" - Display Network Address; Naddd" - Set Network Address - Geokon LC-2x4 Instruction Manual

28

3.21 "NA" - Display Network Address

Displays the current network address.
*NA
Network address: 1
*
When network recognition is enabled, this number (preceded by the # character) must be entered
for the respective datalogger to respond. The following example illustrates communication with
two different dataloggers on the RS-485 network.
<ENTER>
<ENTER>
#1<ENTER>
Network address: 1
*NA
Network address: 1
*E
<ENTER>
<ENTER>
#2<ENTER>
Network address: 2
*NA
Network address: 2
*E

3.22 "NAddd" - Set Network Address

Sets the current network address to any address between 1 and 256.
*NA10
Network address: 10
*
When network recognition is enabled, this number (preceded by the # character) must be entered
for the respective datalogger to respond. The following example illustrates communication with
two different dataloggers on the RS-485 network.
<ENTER>
<ENTER>
#1<ENTER>
Network address: 1
*NA
Network address: 1
*E