Table of Contents
Advertisement
8
2.5.5 Adding Dataloggers to LogView Projects
Right-clicking on the "TestLoggers" project brings up a context sensitive menu (see
Figure 6) that allows users to add dataloggers to their projects. Selecting New→Logger
from the context menu causes the "Datalogger Settings" dialog to be displayed. Like
Workspaces and Projects, Dataloggers can be assigned a unique human-readable name. For
this example, "MyLogger" was chosen for the Datalogger name. For a complete
description of all datalogger settings please see the LogView Online Help section on
Datalogger Settings. For connection purposes, the relevant tab in this dialog is
"Connection Options" (see Figure 7).
After physically connecting to a PC, all LC-2x4 dataloggers require a COM port to be
identified in the "Connection Options". Starting with firmware revision 3.1.X, LC-2x4
dataloggers can communicate at baud rates of 9600 and 115,200. Before this revision the
datalogger baud rate was 9600 only; for these dataloggers, the default setting should not be
changed (See Figure 7).
Figure 5 - LogView Main Window with new project
Advertisement
Table of Contents
