Df" - Display Or Set Date Format; Dl" - Display Current Mode; Dnnnn" - Display Arrays Forward From User Position - Geokon LC-2x4 Instruction Manual

18
Memory will wrap when full and continue logging
All Thermistors set to standard temperature
*DEFAULT
This will load all channels with factory default gage settings!
Are you sure(Y/N)?Y
All channels restored to factory default gage settings.

3.5 "DF" - Display or Set Date Format

This setting determines how the date information will be displayed in the array when the monitor
mode is active or arrays are displayed from memory. Entering DF displays the current date
format. Entering DF0 sets the date format to julian. Entering DF1 sets the date format to
month,day. The default date format display is Julian (decimal) day.
*DF
Date format is julian.
*DF1
Date format is month,day.
*DF0
Date format is julian.
3.6 "DL" – Display Current Mode
Displays the current datalogger mode setting.
*DL
LC-2x4

3.7 "Dnnnn" - Display Arrays Forward from User Position

Use the D command to display arrays forward from the User Position for verification or
collection. The updated memory pointers are displayed by this command.
*P1
MS:3146 OP:3147 UP:1
*D5
2007,11,23,17,52,43,3.10,25.51,9039.950,-999999.0,-999999.0,-999999.0,23.2,-99.0,
-99.0,-99.0,1
2007,11,23,17,53,43,3.10,24.77,9040.149,-999999.0,-999999.0,-999999.0,23.2,-99.0,
-99.0,-99.0,2
2007,11,23,17,54,43,2.97,24.42,9040.319,-999999.0,-999999.0,-999999.0,23.2,-99.0,
-99.0,-99.0,3
2007,11,23,17,55,43,2.98,24.22,9039.622,-999999.0,-999999.0,-999999.0,23.1,-99.0,
-99.0,-99.0,4