Sthh:mm" - Start Logging; Sv" - Display Software Version; Test" - Perform Internal Self-Tests - Geokon LC-2x4 Instruction Manual

3.34 "SThh:mm" - Start Logging

Start the datalogger logging values; hh is the hour of the day (24-hour format) to start and mm
the minutes. The time entry is optional. Entry is ignored if logging is already started (unless a
time is entered).
*ST
Logging already started!
*ST11:00
Logging will start at: 11:00:00
*

3.35 "SV" - Display Software Version

Returns the software version of the datalogger's operating system software. Consult the factory
to check on latest versions available.
*SV
Software version: 3.7.0
*

3.36 "TEST" - Perform Internal Self-Tests

Initiates a set of internal self-tests that are performed at the factory during final test.
*TEST
LC-2MUX TEST MENU:
SELECTION
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
X
ENTER SELECTION:
TEST
INTERNAL EEPROM
EXTERNAL EEPROM BANK 1
EXTERNAL EEPROM BANK 2
EXTERNAL EEPROM BANK 3
EXTERNAL EEPROM BANK 4
EXTERNAL EEPROM BANK 5
EXTERNAL EEPROM BANK 6
ALL EEPROM
+5X_X
RTC 32KHz
EXTERNAL INPUT (GAGE TYPE 1)
EXTERNAL INPUT (GAGE TYPE 2)
EXTERNAL INPUT (GAGE TYPE 3)
EXTERNAL INPUT (GAGE TYPE 4)
EXTERNAL INPUT (GAGE TYPE 5)
EXIT TEST MENU
33