Appendix D. Sample Data File; Sample Raw Data File - Geokon LC-2x4 Instruction Manual

APPENDIX D. SAMPLE DATA FILE

D.1 Sample Raw Data File
Datalogger#1,2007,329,1421, 0 ,2.93,25.01,-9040.265,---,---,---,23.7,---,---,---,1
Datalogger#1,2007,329,1421,10,2.93,25.13,-9039.986,---,---,---,23.7,---,---,---,2
Datalogger#1,2007,329,1421,20,2.93,25.42,-9039.950,---,---,---,23.7,---,---,---,3
Datalogger#1,2007,329,1421,30,2.93,25.30,-9041.042,---,---,---,23.7,---,---,---,4
Datalogger#1,2007,329,1421,40,2.93,25.16,-9040.502,---,---,---,23.7,---,---,---,5
Datalogger#1,2007,329,1421,50,2.93,25.07,-9039.458,---,---,---,23.7,---,---,---,6
Datalogger#1,2007,329,1422, 0 ,2.93,25.04,-9040.303,---,---,---,23.7,---,---,---,7
The comma delineated columns above represent the following:
Column 1 represents the datalogger id
Column 2 represents the year when the array was stored.
Column 3 represents the julian day (or day, month format, see Section 3.5).
Column 4 represents the time (or hh,mm format, see Section 3.37).
Column 5 represents the seconds.
Column 6 represents the main battery voltage (alkaline batteries, nominal 3.0 VDC).
Column 7 represents the internal temperature in degrees Celsius.
Column 8 represents the Channel 1 vibrating wire reading.
Column 9 represents the Channel 2 vibrating wire reading.
(disabled)
Column 10 represents the Channel 3 vibrating wire reading.
(disabled)
Column 11 represents the Channel 4 vibrating wire reading.
(disabled)
Column 12 represents the Channel 1 external temperature in degrees Celsius.
Column 13 represents the Channel 2 external temperature in degrees Celsius. (disabled)
Column 14 represents the Channel 3 external temperature in degrees Celsius. (disabled)
Column 15 represents the Channel 4 external temperature in degrees Celsius. (disabled)
Column 16 represents the Array #
49