Figure 4-1 • Set Alarm-Config Command Hierarchy
Disabling Specific Alarms
The Set Alarm-Config command allows you to enable or disable specified alarms.
Example
To disable the GNSS antenna open-circuit alarm (alarm #33), enter the following:
1. Login at the Admin or Config-user level (see Logging In, on page 215).
2. Type
set alarm-config state alarm 33 disable
Showing Current Alarm Settings
The Show Alarm-Config command displays the set and clear alarm thresholds for every alarm type.
Example
To display the configuration for all alarm types, enter the following:
•
Type
show alarm-config
Showing Current Alarms
The Show Alarm command displays all current alarms.
Example
To display a list of all current alarms enter the following:
•
Type
and press Enter.
show alarm
and press Enter.
and press Enter.
09 8- 007 77 -0 00 Re v. A
SyncServer S80 NTP User Guide
55