Table of Contents
Advertisement
5 – Troubleshooting
This chapter provides troubleshooting information for the SyncServer S80.
Status of the S80 can be determined by the CLI "show status" command and SNMP trap messages. The
SNMP trap manager IP address and associated settings must be configured with the "set snmp"
command before SNMP traps are available.
System Messages
Table 5-1 • S80 System Messages
Description
Entered
time/frequency
warm-up state
Entered
time/frequency free-
run state
Entered
time/frequency fast-
track state
Entered
time/frequency
normal-track state
Entered
time/frequency
bridging state
Event
Default
ID
Severity
Transient
001
Minor
No
002
Minor
No
003
Event
No
004
Event
No
005
Event
No
09 8- 007 77 -0 00 Re v. A
Chapter
Message Text
Entered time/frequency
No action required
warm-up state
Transitioned out of
No action required
warm-up state
Entered time/frequency
No action required
free-run state
Transitioned out of
No action required
free-run state
Entered time/frequency
No action required
fast-track state
Transitioned out of
No action required
fast-track state
Entered time/frequency
No action required
normal-track state
Transitioned out of
No action required
normal-track state
Entered time/frequency
No action required
bridging state
Transitioned out of
No action required
bridging state
Corrective Action
61
Advertisement
Table of Contents
