1 – Overview
The Microsemi SyncServer S80 is a fully integrated GPS/GLONASS antenna, receiver, NTP server, and
PoE interface that easily integrates into existing PoE infrastructure to immediately be the source of
accurate, secure, and reliable time stamps for all network connected devices. Network isolated physical
security systems benefit as the ruggedized Stratum 1 network time server is ideal for time-synchronizing
IP security cameras, access control devices, and digital/ network video recorders. SyncServer S80 is
also suitable for synchronizing the time on small enterprise networks.
Key Features
•
Security-hardened Stratum 1 NTP server
•
Fully ruggedized and integrated GPS/ GLONASS receiver, NTP server, and PoE network
interface
•
Secure Microsemi NTP Reflector technology
•
100-nanosecond time stamp accuracy
•
500 NTP requests per second standard, 1000 optional
•
Hardware-based time stamps
•
Modern GbE interface with IPv4/IPv6/ SNMP/DHCP support
•
Stationary or moving platforms
•
Mounting hardware included
Software Option
The SyncServer S80 includes built-in hardware features enabled via software license key.
•
1000 NTP requests per second.
Activation keys are associated with the serial number of the device on which the keys are stored and
travel with that device. The user must enter key(s) with the
Functional Description
The S80 is based on an innovative and extremely sensitive GNSS receiver and patented Microsemi
timing algorithms. A singular Ethernet connection is used for management, PoE to the S80 as well as
NTP Stratum 1 time server operations..
The SyncServer S80 with integrated GNSS receiver and antenna solves the problem of delivering
precise time for physical security networks isolated from the Internet that need accurate time stamps in
challenging environments by placing the integrated unit on the roof.
Management of the SyncServer S80 can be achieved via CLI over SSH v2.
Physical Description
The SyncServer S80 consists of a fully integrated GPS/GLONASS receiver, NTP server, and PoE
interface. All connections for the SyncServer S80 are through the RJ45 Ethernet jack via a cable on the
set license add
09 8- 007 77 -0 00 Re v. A
SyncServer S80 NTP User Guide
Chapter
CLI command.
7