Test All Stations
You can test all stations connected to your controller by running each
of them in sequence.
Sometimes this is useful after installation, for general maintenance or
as a first step in troubleshooting your system.
b
b
NOTE: Only stations with programmed run times are included in
the Test All Stations operation.
g
b
Turn the controller dial to Manual Watering.
A
The Manual Watering screen appears. Press the Down Arrow
button to select Test All Stations; then press Next.
B
The Test All Stations screen appears. Press the + and – buttons to
adjust the Test Run Time (adjustable from 1 to 10 minutes) per
station; then press Run.
1
2
C
A confirmation screen appears.
D
Once Run is pressed, stations can be monitored and advanced by
turning the dial to the AUTO position and using the Adv button.
Press the + and – buttons to increase or decrease Run Time
minutes for the current station.
3
4
ESP-LXME Controller
89