Rain Bird ESP-LXME Installation, Programming & Operation Manual page 72

G
Press the Yes and No buttons to select the stations you would like
to include. Press Next and Back buttons to select stations; then
press Next.
H
Press the + and – buttons to set the time delay for when you want
the Learn Flow exercise to start; then press Start.
l Press and HOLD buttons to accelerate settings for hours and b
minutes.
b b
NOTE: You can choose a delay between 0 hours, 0 minutes up to
24 hours.
7
I
A confirmation screen appears; press Start again to set the Learn
Flow exercise.
J
The Learn Flow Starting confirmation screen appears, confirming
the delay time until the Learn Flow operation will start.
9
66 ESP-LXME Controller
8
j
b b
NOTE: Station flow rates can still be entered manually if desired.
See FloManager section for details.
b b
NOTE: The Learn Flow Utility can take up to 5 minutes per station.