Program Run Time - Rain Bird ESP-LXME Installation, Programming & Operation Manual

Program Run Time

Review total Run Time for an individual program:
g b
Turn the controller dial to Test All Stations/Check System.
A
The Check System screen appears with Confirm Programs
selected; press Next.
B
The Confirm Programs screen appears. Press the Down Arrow
button to select Program Run Time; then press Next.
1 2
C
The Total Run Time screen appears and total Run Time is displayed
for the currently selected program.
b b
NOTE: If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
3
b b
NOTE: For stations set up for Cycle+Soak, the Cycle Time (when
irrigation is occurring) will be included in Program Run Time
calculations but Soak times will NOT be included. See Section D,
Set Up Cycle+Soak, for more details.
b b
NOTE: The total program run time is the cumulative total run
time if stations are run one at a time. If SimulStations have been
set to more than 1, total irrigation time will be less.
e b
Change the Program Select switch and repeat this process to
review and confirm Program Run Times for other programs as
desired.
ESP-LXME Controller 23