Table of Contents
Advertisement
G
Once wiring is completed, fill top of conduit with waterproof
caulking to prevent insect intrusion into the controller cabinet.
7
106
ESP-LXME Controller
Connect Local Weather Sensor
The ESP-LXME can accept input from a single weather sensor wired
directly to the controller or through a wireless receiver.
A local weather sensor can be bypassed with the sensor bypass switch
on the controller front panel.
To Enable a Local Weather Sensor:
A
On the controller front panel, slide the Weather Sensor switch to
Active.
a
b
b
NOTE: Follow the sensor manufacturer's instructions to correctly
install and make wire connections to the sensor. Ensure the sensor
installation is in compliance with all local codes.
Advertisement
Chapters
Table of Contents
