Rain Bird ESP-LXME Installation, Programming & Operation Manual page 53

E
Press the + and – buttons to select Yes if the station requires a
master valve, otherwise select No; then press Next.
F
The Weather Sensor Assignment screen lets you select whether a
station obeys or ignores the installed weather sensor. Press the +
and – buttons to select Obey or Ignore; then press Next.
5
b b
NOTE: The weather sensor can be turned on (Active) or off
(Bypassed) using the Weather Sensor switch on the controller
front panel.
e b
Repeat this process to set up additional stations.
6
ESP-LXME Controller 47